Plywood and veneers in Abu Dhabi which are sometimes referred to engineered wood is sourced purely from logs of wood cut from trees. Plywood and veneers in Al Ain are produced in numerous industries utilizing huge machines that process the raw materials in an efficient manner. Veneers are generally created by stripping off thin layers of wood from a huge log. Industries involve huge cutting machines to perform this task. In this process, the entire log of wood is maintained against a long sharp ... More >>

Plywood and veneers in Abu Dhabi which are sometimes referred to engineered wood is sourced purely from logs of wood cut from trees. Plywood and veneers in Al Ain are produced in numerous industries utilizing huge machines that process the raw materials in an efficient manner. Veneers are generally created by stripping off thin layers of wood from a huge log. Industries involve huge cutting machines to perform this task. In this process, the entire log of wood is maintained against a long sharp blade. The log is made to rotate as the blades proceed in their cutting process. This process also celled as rotary cutting process is widely used in industries to create large sheets of veneer. Few industries also follow another method called flat cutting method in which layers of wood is cut from a log of wood that is held stationary. This process generally results in a grained veneer which is used in multiple applications. Plywood is made by gluing three layers of veneer together. Industries involved in its manufacture use a specific procedure. The wood grain in each veneer layer is kept perpendicular to the wood grain in the adjacent layer. Many industries manufacturing plywood and veneers in Umm Al Nar however, induce certain changes to the manufacturing process based on the application in which they are used. For example, few applications require the plywood to be very strong and durable. To enable this, industries place additional layers of veneers while gluing to make it stronger. The plywood and veneers in Abu Dhabi have good crack resistance and does not bend or shrink so easily. However, these properties vary with the number of veneer layers that are put together. Greater the number of veneers layers, stronger the plywood. Plywood and veneers in Al Ain also have good resistance to warping and twisting. These properties make them unique and are widely used in large number of applications. Exterior glued plywood is used in outdoors as it can withstand moisture. Its physical dimensions and strength remain intact, even when exposed to temperature below zero degrees Celsius. Plywood and veneers in Abu Dhabi is also used to create curved surfaces as they can bend easily with the grain. Top smooth surfaces found in skateboard ramps are generally made of plywood. Apart from these, plywood and veneers in Umm Al Nar are also used extensively in construction of roofs, walls and floors. Many modular interior designs use plywood to give a rich look to walls and floors. Plywood and veneers in Abu Dhabi are utilized widely to shape boxes that are used by many package contractors to pack and transport various items. Industries producing furniture, die cutting board, fencing, wind bracing panels and several other items also utilize plywood and veneers in Abu Dhabi. << Hide