2 results for 

Facade Panels in Sharjah

About Facade Panels

Facade panels are used as exterior wall claddings in buildings. They are integrally designed to support tall structures and blend in with the building architecture. They are energy efficient and robust in design. They come in a wide range of colours and designs to choose from. They can be modified in different ways to match the design of the building. Due to its robust design, they can be used as cladding for any type of construction and any type of building. In modern high raised buildings facade panels are suspended from concrete floor slabs. They are either suspended or attached to precast concrete slabs. They are made up of aluminium which is anodized or powder coated or titanium which is stronger than reinforced steel. Double skin facade panels come with two skins or two facades which are placed in such a manner that the air flows through the intermediate cavity. This panel is best suited for areas which face high temperature and sunlight conditions as they cool down the building efficiently. The ventilation cavity acts as a natural fan and can reduce the energy consumed by HVAC equipment and reduce your electricity bill significantly.

Double glazed skins can be used in double skin facade panels, they are either single or double glazed skins which are located from a distance of 20 centimetres to 2 meters. They are efficient at repelling heat and other harmful rays. Solar shading devices can be placed inside the cavity of double glazed panels to provide UV protection. Curtain wall facade panels are used as an outer covering of a building as it is non-structural and utilized to provide weather resistance. They are lightweight and non-structural as they reduce construction cost. Glass curtain wall facades act as a natural barrier as they allow sunlight to penetrate through. They do not exert any structural load on the building and are designed to resist air and water infiltration.

Curtain facade panels transfer lateral wind loads which are incident to the main building structure by coming up with a different construction. Curtain wall systems are designed with extruded with aluminium framing systems which comprise of steel frames infilled with glass. There are four ways to install curtain facade panels which are the stick system, ladder system, unitized system and rain screen principle. The stick system method is used to install ground floor curtain walls. In this method, facade panels are installed horizontally by members. Framing members are fabricated in industries and glazed services as they are performed at the job site. In the ladder system method mullions are split, snapped or screwed together according to the design of the building. In the Unitized system method curtain walls are fabricated and assembled in factories by glazing. They can be installed in an interior climate controlled environment. They are used in large projects as it involves high cost of labour. However, unitized curtain walls can be installed quickly and involve low field installation cost and can be set up in an interior climate controlled environment. In the rain screen principle, curtain wall facade panels are constructed by capturing the inner and outer layer of glass in an outer gasket of space. The glazing rebate is ventilated to equalize the pressure between the inner and outer side of the glass. Some popular locations to get in touch with facade panel designers in Sharjah are SAIF zone, Najda Steet, Nasser street, King Faisal Road, Rolla and Industrial area 12.



You will be connected to