Hdpe Fittings in Ajman
Top Hdpe Fittings Companies in ajman
- Nile Building Materials Trading LLC, Ajman, Contact: 04-2233950
- Vulcan Industries LLC, Ajman, Contact: 06-7436665
- Power Plastic Factory LLC, Ajman, Contact: 06-7401074
- Al Itifaque Building Tools and Hardware Trading LLC, Ajman, Contact: 06-7488635
- A M Bldg Mat Trdg, Ajman, Contact: 06-7438773
- Abdulla Mohammed Building Material and Tools Trading, Ajman, Contact: 06-7481323
- Abu Mahmoud General Trading, Ajman, Contact: 06-7438518
- Advance General Trading Company LLC, Ajman, Contact: 06-7481397
- Al Ahsan Building Material Trading LLC, Ajman, Contact: 06-7466173
- Al Ajer Building Hardware Trdg, Ajman, Contact: 06-7480352
About Hdpe Fittings
HDPE pipe suppliers in UAE
HDPE (High-density polyethylene) is a strong-density polyethene pipe, which is nothing but a plastic pipe with flexible and impact resistance characteristics, that goes underground instead of the usual concrete pipes. It helps to manage the flow of high-pressure liquids and gases. HDPE pipe controls the movement of liquids and gases under high pressure. The plastic is safe and doesn't add toxins to portable drinking water. It doesn't rust and keeps the water and chemicals flowing through it clean. These HDPE pipes are black with four blue stripes and are key in distributing clean water to homes and businesses. They have more benefits than metal or plastic pipes. They have the lowest repair frequency with a high life expectancy. The way HDPE pipes are joined together uses the special properties of their Reinforced Thermoplastic Pipe material. A hot plate is put between the HDPE pipes and their ends are melted together to join them.
HDPE Pipe Manufacturers in Dubai
HDPE pipe manufacturers in Dubai, such as Sahara Emirates, TechnoPro Middle East, and Polyfab Plastic Industry, often check and monitor their HDPE pipes during production. The final checks include looking at the inside smoothness, size, how the plastic melts, heat tests, safety tests, strength tests, and pressure tests.
HDPE Water Line Suppliers
HDPE water pipes that are wider have thinner walls. Cosmoplast in Dubai is a big supplier of these pipes. They sell lightweight pipes in sizes from 20mm to 250mm, designed for pressures between 4kg and 10kg. These pipes are commonly used in industries, farming, and coal mines. They promise good performance with their high-quality pipes. HDPE pipes are better than PVC in many aspects like flexibility, chemical resistance, joint integrity and corrosion resistance.
Black HDPE polyethene pipeSize: Water pipes are 20-1600mm wide. Material: Made of PE63, PE80, PE100, PE4710, PE3608, PE3408, PE100RC. Uses: Residential water, mining, gas, sea work, chemicals, industry, digging and irrigation. Packaging: Straight pipes are 11.8m or 5.8m long, and smaller pipes (20-90mm) are coiled up to 100-200m. Quality Checks: Inspected at different stages like raw material, during making, and before delivery, sometimes by an outside company. Connectors: For SDR6-SDR17: Joining by heating, pushing together, or using special connectors.
HDPE Gas Line Suppliers
HDPE gas line suppliers deal with PE4710 or PE100 pipes which are ideal for gas and oil distribution in industries. They are cost-effective, leak-proof, and long-lasting. This means PE4710 or PE100 pipes can outlast metal pipes without needing extra protection or frequent fixes. They naturally resist chemicals and rust, preventing leaks. The inside of these pipes is smooth, so oil and gas don't stick to them over time.
Packaging: Pipes are either 11.8 meters or 5.8 meters long when straight. Smaller pipes, from 20mm to 90mm, are rolled up in coils that are 100 to 200 meters long.
Quality Checks: The pipes are checked at different stages, like when the materials arrive, during manufacturing, before being sent out, or sometimes by an outside company.
HDPE Fire Line Suppliers
Compared to ductile iron pipes and steel pipes, HDPE fire lines are non-corrosive with excellent chemical and wear resistance. HDPE pipes in the fire protection industry are light in weight, long in pipe length and flexible, so they are easy to install and safe.
Materials: Use only high-quality PE 100 and PE 100-RC materials approved by the PE 100+ association.
Pipes: Make pipes according to ISO 4427, EN 12201, ASTM 3350, or AWWA C906 standards.
Fittings: Create fittings following ISO 4427 and EN 12201 standards and get them certified under EN 12201. Prefer using injection-molded fittings when available.
Approved Manufacturer: The maker should have ISO-9001 and ISO-14001 certifications.
Pressure Rating: HDPE pipes and fittings should handle pressure well at 20 °C for at least 50 years, including a safety margin of 1.25. For firefighting, the pressure rating of HDPE pipes and fittings should be between PN16 to PN32 (SDR11 to SDR6).
HDPE Drainage Line Suppliers
HDPE pipes in drainage lines are resistant to chemicals, can handle high temperatures, are flexible and make it perfect for homes, industrial buildings, labs, hospitals, and hotels.HDPE drainage pipes are ideal for drainage, like for soil and waste, both above and below ground, and even for chemical waste. The pipes and fittings come in sizes from 20-1600mm diameter. They can be linked through butt-fusion, electro-fusion, flanges, or custom-made pipe fittings. They can last up to 50 years. Pipes are available in lengths of either 11.8 meters or 5.8 meters, and smaller pipes (20-90mm) are coiled up to lengths of 100-200 meters. The products go through checks at different stages like when the materials are received, during manufacturing, before shipment, or sometimes by an external company.