
Location : Horizon Towers
Phone :
06 70...06 7046767
Mobile :
054 4... 054 4479788

Location : Warehouse 5/14, Al Khabaisi St, 14B, Deira
Phone :
04 26...04 2682730
Mobile :
052 1... 052 1640169

Location : Behind Emirates Market, New Industrial Area
Mobile :
054 7... 054 7780964,
054 3054 3801046

Location : Office 1, Ajman Industrial Area 2
Mobile :
050 7... 050 7585208

Location : Sajja Industrial Area
Phone :
06 53...06 5326025
Mobile :
055 6... 055 6056672

Browse the live listings: Yellow Pages DI manhole covers page. Back to the manhole covers hub.
Quick answer: 4 suppliers on Yellow Pages UAE list ductile iron manhole covers in the UAE:
In short, choose Ecotek Trading LLC if you are near Horizon Towers; choose Al Fatah International Trading LLC if you are near Al Quoz Industrial Area 2; choose Al Omraniya Trading Co LLC if you are near Al Khabaisi, Deira; choose Soft Fitting Pipes & Fittings Trading Co. LLC if you are near Al Quoz Industrial Area 4. Typical price range: AED 230–1,400 per unit.
Jump to → Suppliers compared | Which to choose | Nearest supplier | Standards | Types | What it is | Load classes | Shapes & finishes | Misconceptions | UAE conditions | Season calendar | Installation | Alternatives | Maintenance | Before you order | Red flags | WhatsApp enquiry | Pricing | Real job | Who offers it | FAQ | More categories | Contacts
4 suppliers on Yellow Pages UAE list ductile iron manhole covers: Ecotek Trading LLC (Horizon Towers, Ajman), Al Fatah International Trading LLC (Al Quoz Industrial Area 2, Dubai), Al Omraniya Trading Co LLC (Al Khabaisi, Deira, Dubai) and Soft Fitting Pipes & Fittings Trading Co. LLC (Al Quoz Industrial Area 4, Dubai).
| Supplier | Base | Contact | What they list | Brands | Best for |
|---|---|---|---|---|---|
| Ecotek Trading LLC | Horizon Towers, Ajman | 06 7046767 | DI, CI, aluminium and stainless steel manhole covers; DI and stainless steel gratings; floor drains | – | Buying covers with DI gratings, floor drains and bollards |
| Al Fatah International Trading LLC | Al Quoz Industrial Area 2, Dubai | 04 3383377 | D.I and C.I covers, aluminium, stainless steel, FRP, FRA and RBA manhole covers, manhole covers and frames, floor trap covers | MERT DOKUM Access Covers | Buying covers with drains, gratings, roof tiles and bricks |
| Al Omraniya Trading Co LLC | Al Khabaisi, Deira, Dubai | 04 2682730 | Manhole covers, CI manhole covers, DI manhole covers | – | Buying covers with pipes, valves and fire-fighting fittings |
| Soft Fitting Pipes & Fittings Trading Co. LLC | Al Quoz Industrial Area 4, Dubai | 054 3229567 | Manhole covers, aluminium manhole covers, ductile manhole covers | – | Buying covers with pipes, valves and water heaters |
Taken from each company's Yellow Pages listing. Products are as the supplier lists them; stock is not confirmed.
Pick by location first, then by range: Ecotek Trading LLC in Ajman is the right call for ductile iron manhole covers if you are close to Horizon Towers, and the boxes below cover the others.
Choose Ecotek Trading LLC if you are near Horizon Towers, Ajman and want one supplier for DI, CI, aluminium and stainless steel manhole covers; DI and stainless steel gratings; floor drains; the listing shows it was established in 2025.
Choose Al Fatah International Trading LLC if you are near Al Quoz Industrial Area 2, Dubai and want one supplier for D.I and C.I covers, aluminium, stainless steel, FRP, FRA and RBA manhole covers, manhole covers and frames, floor trap covers; its listing also names MERT DOKUM Access Covers; the listing shows it was established in 2002.
Choose Al Omraniya Trading Co LLC if you are near Al Khabaisi, Deira, Dubai and want one supplier for manhole covers, CI manhole covers, DI manhole covers.
Choose Soft Fitting Pipes & Fittings Trading Co. LLC if you are near Al Quoz Industrial Area 4, Dubai and want one supplier for manhole covers, aluminium manhole covers, ductile manhole covers.
If you are in or near Horizon Towers, Ajman, the nearest listed supplier of ductile iron manhole covers is Ecotek Trading LLC; use the table for other areas.
| Your area | Listed supplier there | Directions |
|---|---|---|
| Horizon Towers, Ajman | Ecotek Trading LLC | Get directions |
| Al Quoz Industrial Area 2, Dubai | Al Fatah International Trading LLC | Get directions |
| Al Khabaisi, Deira, Dubai | Al Omraniya Trading Co LLC | Get directions |
| Al Quoz Industrial Area 4, Dubai | Soft Fitting Pipes & Fittings Trading Co. LLC | Get directions |
Ecotek Trading LLC in Ajman and Al Omraniya Trading Co LLC in Deira, Dubai both list DI (ductile iron) manhole covers, which are iron castings treated so the carbon forms round nodules instead of flakes. That small change makes the metal tough: under a shock load it bends slightly rather than snapping like grey cast iron.
In practice that is why DI is the default for roads, service yards and petrol stations. It is heavy, so it stays put under traffic, and it usually arrives with a black bitumen-type coating.
Before you compare prices, ask every supplier one question: "Which standard, which part and which material grade?" A cover sold as "D400" without a named standard is only a claim. These are the references that matter for ductile iron (DI) covers.
| Standard | What it covers | Why it matters to you |
|---|---|---|
| EN 124-1:2015 | Definitions, load classes (A15 to F900), design rules, performance requirements, test methods and marking | The main reference behind every class letter and test load on your quote |
| EN 124-2:2015 | Cast iron covers and gratings, which includes ductile (spheroidal graphite) iron | The part to cite when you specify a DI cover |
| EN 124-3, -4, -5, -6 | Steel and aluminium alloy; steel fibre reinforced concrete; composite; PP, PE and PVC covers | Cite the matching part if you compare DI with GRP/composite, steel, aluminium or concrete covers |
| EN 1563 | The material standard for spheroidal graphite (ductile) cast iron | Gives the grade, for example EN-GJS-500-7 |
| ISO 1083 | International standard for spheroidal graphite cast iron | Sometimes quoted by overseas makers as the equivalent material reference |
| EN 1561 | Grey cast iron | The material standard behind cast iron (CI) covers, useful when comparing DI with CI |
| BS EN 124:1994 | The older single-document version, replaced by the multi-part 2015 series | Older UAE specifications may still quote it; ask your consultant to confirm the current requirement |
It is a material grade code. GJ means cast iron, S means spheroidal (round) graphite, 500 is the minimum tensile strength in MPa, and 7 is the minimum elongation in percent, which is the "bend before it breaks" figure. EN-GJS-500-7 is commonly quoted for DI covers, though makers use other grades, so ask for the grade and a material certificate rather than assuming.
A mark from an independent certification body shows that the product, factory control and testing were audited, not just claimed. Examples of bodies that certify EN 124 products include BSI and Kiwa; follow whichever body your project specification names. If a supplier offers certified and uncertified versions of the same class, ask for the price difference in writing so you can make an informed choice.
Ask for these documents: the EN 124 type-test report from an accredited laboratory, the material (grade) certificate, and the coating specification. Add them to your enquiry before quoting, not after delivery.
A properly made cover tells you what it is. Clean the top surface and look for a cast marking; it should be readable after installation. Cover and frame should each carry markings, and the two should match.
| Marking | Example | What it tells you |
|---|---|---|
| Standard reference | EN 124-2 | The part of the standard the cover was designed and tested to |
| Load class | D 400 | The EN 124 class. D400 means a 400 kN test load for carriageways |
| Manufacturer mark | Maker name or logo | Who made it, so you can ask for test reports and trace problems |
| Certification mark | Certifier logo or number | Independent approval, where the maker is certified |
| Traceability code | Batch, date or pattern number | Helps trace a faulty batch (not always present) |
| Use marking | SEWER, DRAIN, WATER, ELECTRIC | Shows which service the chamber belongs to, when embossed |
Al Fatah International Trading LLC in Al Quoz, Dubai lists D.I covers, and like any supplier it will ask you for the EN 124 class first, because the class decides the weight and the price. Match the class to the heaviest wheel that could ever cross the cover, not the usual one.
EN 124 load classes (the class is marked on the cover and frame):
| Class | Test load | Typical place | Choose it if |
|---|---|---|---|
| A15 | 15 kN | Footpaths, gardens, pedestrian-only areas | Nothing heavier than people or bicycles will cross it |
| B125 | 125 kN | Footways, villa driveways, car parks for cars | Cars may park or turn on it |
| C250 | 250 kN | Kerbside channels, edge of roads | It sits in a gutter or within half a metre of the road edge |
| D400 | 400 kN | Roads, service roads, car parks used by all vehicles | Lorries, buses or water tankers can drive over it |
| E600 | 600 kN | Loading bays, warehouses, ports | Forklifts or heavy wheel loads use the area |
| F900 | 900 kN | Airport aprons and runways | Aircraft or very heavy equipment run over it |
Covers are ordered by clear opening, which is the free space inside the frame, not by the outside size. This is the number that decides whether a person, a pump or a pipe can pass. Sizes below are commonly quoted; actual stock varies by supplier, so confirm availability.
| Common clear opening | Typical use | Notes |
|---|---|---|
| 450 mm (round or square) | Small inspection chambers and drainage points | Too small for a person to enter |
| 600 mm (round or 600 x 600) | Standard manhole for man entry | 600 mm is the usual minimum clear opening for entry chambers |
| 700 to 750 mm | Larger sewer, water and utility chambers | Easier for equipment access |
| 800 mm | Pump stations, larger utility chambers | Often heavier or split into two leaves |
| 900 to 1,000 mm and above | Large chambers, plant and tank access | Often triangular or multi-piece so people can lift them |
| Rectangular (e.g. 600 x 900) | Valve chambers, electrical and telecom pits | Check hinge side and chamber layout |
Weight rises with the load class and the opening size. A B125 cover is much lighter than a D400, and E600 and F900 covers are heavier again. Do not rely on a general figure: ask the supplier for the weight of the cover and the frame separately and as a set, from the maker's data sheet.
Pick the type by what the cover must do: carry traffic, keep out water and smell, stop theft, or blend into paving. These are the main options.
| Type | What it is | Choose it if | Watch out for |
|---|---|---|---|
| Round cover in square or round frame | Round cover that cannot drop through the opening | Roads and general use | Frame must match the cover design |
| Square or rectangular | Lines up with kerbs and paving | Paved areas and utility pits | Corners need good seating |
| Single, double or triple triangular | Large opening split into smaller leaves | Openings too large for one cover | More joints; check the load class applies to the whole assembly |
| Recessed (tile-in or infill) | Tray that takes paving, tiles or concrete | Villa driveways, plazas, malls | Infill type and depth must match what was tested; ask for the class with infill |
| Hinged | Cover on a hinge, often with a safety stay | Frequent access | Check the opening angle and safety stay |
| Locking or bolted | Secured with a bolt, lock or key | Theft or tampering risk | Keep keys and spare bolts available |
| Sealed or watertight | Gasket seals against water, smell or gas | Odour control, flood-prone spots | Seals dry out and need cleaning and greasing |
| Ventilated | Openings for air flow | Chambers that need ventilation | Sand and debris can enter |
| Anti-slip surface pattern | Raised pattern on the top face | Ramps, wet areas, pedestrian crossings | Wear reduces grip over time |
| Supplier | Formats Confirmed by Published Source |
|---|---|
| Ecotek Trading LLC | DI/CI solid-top, recessed and double-triangular covers; DI gratings and channel gratings. |
| Al Fatah International Trading LLC | Solid-top and recessed covers with single-seal or double-seal configurations; multiple load classes. |
| Al Omraniya Trading Co LLC | KAJ ductile iron (DI) and cast iron (CI) covers; sizes and weights vary according to requirements. |
| Soft Fitting Pipes & Fittings Trading Co. LLC | Cast iron, ductile iron and aluminium manhole covers. |
Buyer note: Published product ranges do not necessarily indicate current stock availability. Confirm the required clear opening, frame dimensions, EN 124 load class, material and sealing configuration directly with the supplier before ordering.
Most DI covers leave the factory with a black bitumen-type coating, which protects the iron in storage and early service. Epoxy or similar coatings are available for harsher conditions. Near the sea or in industrial areas, coatings wear faster, so ask what coating is applied, how thick it is and how to touch it up. Do not paint over the class marking, and keep keyholes clear.
Gully gratings take surface water into storm drains, so they must carry traffic and let water in. Ecotek Trading LLC in Ajman lists DI gratings, and Al Fatah International Trading LLC lists covers with floor trap covers. Ask for the class (D400 for roads), the opening area for water intake, whether the grating is hinged or locked, and the frame size.
Match the class to the heaviest wheel that could ever cross the cover, then add a margin. Use this as a starting point and let your engineer or consultant confirm it.
| Where it will be used | Typical class | Notes |
|---|---|---|
| Garden, footpath, pedestrian-only area | A15 | Nothing heavier than people or bicycles |
| Villa driveway used only by cars | B125 | If tankers or delivery trucks come in, step up to C250 or D400 |
| Car park for cars only | B125 | Check ramps and loading zones |
| Kerbside gutter or road edge | C250 | Within about half a metre of the road edge |
| Public road, service road, compound road | D400 | Lorries, buses and water tankers can use it |
| Petrol station forecourt and tanker area | D400 or higher | Tankers are heavy; confirm with your engineer and the station operator |
| Car park used by trucks or delivery vehicles | D400 | Do not use B125 here |
| Warehouse, loading bay, forklift route | E600 | Confirm the heaviest wheel load |
| Port or container yard | E600 or F900 | Container handlers apply very high wheel loads; get an engineer's check |
| Airport apron or runway | F900 | Aircraft loads |
Ecotek Trading LLC in Ajman and other ductile iron manhole cover suppliers hear the same few beliefs again and again; this is what is actually true.
| What people think | What is actually true |
|---|---|
| Ductile iron doesn't rust | Bare ductile iron rusts like any iron. The black coating protects it, and it wears fastest near the sea. |
| A heavier cover is always stronger | The EN 124 class marked on the cover decides what it can carry, not the weight. A well-designed ductile iron cover can be lighter than a cast iron one of the same class. |
| Any cover of the same size will fit my frame | Covers are made for one frame design. A different seating shape is the most common reason a brand-new cover rocks. |
| The supplier will come and fit it | None of the listings here say the supplier installs covers. Plan for your own contractor unless the supplier confirms otherwise. |
Ecotek Trading LLC in Ajman supplies ductile iron manhole covers, but UAE site conditions decide how long they last.
UAE tip – Heat: Metal covers in direct summer sun get hot enough to burn bare skin. In play areas and pool decks, consider tile-in covers, and leave the expansion gaps the maker specifies.
UAE tip – Sand and shamal wind: Blown sand packs into keyholes, seal grooves and the gap around the cover, especially after a shamal. Clear keyholes regularly and grease seals after cleaning.
UAE tip – Coastal corrosion: Salt air near the sea attacks coatings, zinc and lower grades of stainless steel. On seafront plots ask about coated ductile iron, 316 stainless or composite.
UAE tip – Approvals: Work on public roads, utility chambers or fire access routes needs approval from the authority or utility that owns them, and Civil Defence rules apply to fire access. Your consultant or contractor should confirm what is needed.
UAE tip – Summer midday work ban: Outdoor work stops during the midday break, which usually runs from 15 June to 15 September. Check the dates announced each year and book installs for mornings or evenings.
Safety: this is general guidance. Have a qualified technician or engineer check your site before you choose or fit a cover, and never enter a manhole chamber: they can hold harmful gases.
Ecotek Trading LLC in Ajman supplies ductile iron manhole covers; checking them at the right points in the UAE year stops most call-outs.
| When | What happens | What to check |
|---|---|---|
| October–November | Run-up to the rains; most rain falls between November and April, often in short, heavy storms | Clear gratings and gully covers; check covers in low spots are seated and locked |
| December–April | Rain season; storm water can fill chambers and lift light covers | After heavy rain, check no cover has shifted, sunk or lifted |
| March–July | Dust and shamal winds | Clear sand from keyholes; clean and grease seals |
| June–September | Peak heat and the midday outdoor work break | Book works for early morning or evening; check seals for drying out |
| All year, near the coast | Salt air | Rinse covers and check coatings every few months |
A general guide; a technician should set the inspection routine for your site.
Ecotek Trading LLC in Ajman supplies ductile iron manhole covers; the fitting is normally done by your contractor, along these lines.
For more detail see the manhole cover installation guide. A technician should confirm the method for your site.
Ecotek Trading LLC in Ajman can quote alternatives to ductile iron manhole covers; these are the usual options and when they make sense.
| Alternative | Choose it if | Watch out for |
|---|---|---|
| Grey cast iron (CI) | Budget matters and traffic is light | Brittle: it can crack from a sudden impact |
| GRP / composite | Theft is a risk or you need a non-conductive cover | Check the load class is really tested, not just claimed |
| Recessed aluminium or stainless steel | The cover sits in a tiled or paved pedestrian area | Usually not rated for heavy vehicles |
There is no single figure. Service life depends on traffic, the load class chosen, how well the frame is bedded, the coating, and exposure to salt, chemicals and heavy braking loads. A correctly classed, properly bedded DI cover with a sound coating is built to last for many years; poor bedding and a too-low class are the usual reasons for early failure. Inspect covers regularly, as described in the maintenance section above.
Ecotek Trading LLC in Ajman supplies ductile iron manhole covers, and a few minutes of upkeep a year stops most problems.
| Symptom | Likely cause | Fix |
|---|---|---|
| Cover rocks or clunks | Worn or dirty seating, or a frame of a different design | Clean the seating; replace the frame if worn |
| Cover sits proud or sunk | Frame bedding has failed or the paving has settled | Re-bed the frame level with the surface |
| Smell from the chamber | No seal, or the seal is dry or damaged | Clean and grease the seal, or fit a sealed cover |
| Hard to lift | Sand in keyholes, corrosion | Clear keyholes and use the correct lifting keys |
| Cracked cover | Load class too low for the traffic | Replace with a higher class |
| Rust streaks | Coating worn, often near the sea | Clean and recoat, or change material |
Have a technician confirm the cause before buying parts. More fixes: rocking, broken and noisy cover guide.
Before you call Ecotek Trading LLC in Ajman or any other supplier about ductile iron manhole covers, have these answers ready.
| Mistake | What happens | Do this instead |
|---|---|---|
| Ordering by size only | A B125 cover arrives for a road used by tankers | Give the supplier the EN 124 class and the clear opening |
| Measuring the old cover, not the frame opening | The new cover does not fit | Measure the clear opening inside the frame |
| Choosing on price alone | Wrong class or no frame in the quote | Compare like-for-like specs |
Ecotek Trading LLC in Ajman, or any supplier of ductile iron manhole covers, should be able to answer every point below; if a seller can't, treat it as a warning sign.
Have your engineer or technician check anything on a road or in a public area.
Ecotek Trading LLC in Ajman shows a WhatsApp button on its Yellow Pages listing, so this message is the quickest way to get a like-for-like quote for ductile iron manhole covers.
Hello, I found you on Yellow Pages UAE. Please quote for:
– Product: ductile iron manhole cover
– Material: [ductile iron / cast iron / aluminium / stainless steel 304 or 316 / GRP]
– EN 124 class: [A15 / B125 / C250 / D400 / E600]
– Clear opening: [___ x ___ mm], frame depth: [___ mm]
– Top: [solid / recessed tile-in, recess ___ mm / sealed / hinged / locking]
– Frame needed: [yes / no]
– Quantity: [___]
– Delivery to: [area, emirate] by [date]
Photos of the existing cover and frame attached. Please confirm stock, lead time, and whether the price includes the frame and delivery.
Send the same message to two or three suppliers so the quotes can be compared on one spec.
Ecotek Trading LLC in Ajman and the other suppliers here quote ductile iron manhole covers on request; none of their listings publish prices.
Typical price range: AED 300 to 1,500 per unit including VAT, based on UAE supplier and retailer listings; a standard D400 600 x 600 mm ductile iron cover is around AED 750 to 790. Confirm with a written quote.
| Supplier | Item quoted | Price | Quote date |
|---|---|---|---|
| Ecotek Trading LLC | DI D400 cover with hidden hinge, size not stated | AED 450 to 900 | Checked 3 Nov 2026 |
| Al Fatah International Trading LLC | DI D400 cover 600 x 600 mm; its listed brand MERT DOKUM quotes on request, so a UAE retail D400 600 x 600 DI cover is shown | AED 748.80 excl. VAT (AED 786.24 incl. 5% VAT) | Checked 3 Nov 2026 (market reference, not a supplier quote) |
| Al Omraniya Trading Co LLC | DI manhole cover, grade 400, 30 x 30 to 90 x 90 cm | AED 300 to 1,500 incl. VAT | Checked 3 Nov 2026 (market reference, not a supplier quote) |
| Soft Fitting Pipes & Fittings Trading Co. LLC | Ductile manhole cover, D400, 30 x 30 to 90 x 90 cm | AED 300 to 1,500 incl. VAT | Checked 3 Nov 2026 (market reference, not a supplier quote) |
See the manhole cover price guide for what changes the price.
This is an illustrative example, not a customer case study. It shows how the choices on this page fit together on a common type of job.
Site: A gated villa compound in Ajman with a shared internal road and a drainage chamber at the entrance.
Problem: The old light-duty cover and its frame rocked and had started to crack. Water tankers and refuse trucks now use the entrance road, which the original cover was never rated for.
Cover chosen and why: Ductile iron, EN 124-2 class D400, 600 x 600 mm clear opening, solid top, supplied as a cover and frame set because the old frame was worn. D400 suits lorries and tankers, and ductile iron is tougher than cast iron under shock loads. Before ordering, the compound manager asked the supplier for the class marking on both cover and frame, the test report and the delivered price, as in the checklist above.
Result to aim for: A cover that sits flat with no rocking, marked D400 on the cover and frame, bedded by the contractor and opened to traffic only after the bedding has cured. As a budget guide, a D400 600 x 600 mm ductile iron cover is around AED 750 to 790 (see the price table), plus installation.
Ecotek Trading LLC in Horizon Towers, Ajman is the first of 4 companies that offer ductile iron manhole covers; each one is set out below.
Ecotek Trading LLC at Horizon Towers, Ajman lists DI, CI, aluminium and stainless steel manhole covers; DI and stainless steel gratings; floor drains.
Al Fatah International Trading LLC at Door No. 18, Al Fatah International Building, Street No. 14B, Near Jotun Paint, Al Quoz Industrial Area 2, Dubai lists D.I and C.I covers, aluminium, stainless steel, FRP, FRA and RBA manhole covers, manhole covers and frames, floor trap covers. Brands on its listing: MERT DOKUM Access Covers.
Al Omraniya Trading Co LLC at Warehouse 5/14, Al Khabaisi St, 14B, Deira, Dubai lists manhole covers, CI manhole covers, DI manhole covers.
Soft Fitting Pipes & Fittings Trading Co. LLC at Al Quoz Industrial Area 4, Dubai lists manhole covers, aluminium manhole covers, ductile manhole covers.
These are the questions customers ask Ecotek Trading LLC in Ajman and other suppliers about ductile iron manhole covers.
For most outdoor uses, yes. Ductile iron is tougher and less brittle than grey cast iron, so it is less likely to crack under a sudden heavy load. Cast iron can still suit light-duty areas where cost matters.
Bare ductile iron does rust on the surface, which is why covers are coated. In coastal areas the coating wears faster, so check covers yearly and touch up bare spots. Ask a technician if rust is eating into the seating.
D400 is the EN 124 class for carriageways. The cover has passed a 400 kN test load, which suits roads and car parks used by lorries and buses.
Yes. A B125 ductile iron cover is a common choice for a driveway where cars park. If water tankers or delivery trucks use the drive, ask for C250 or D400.
The weight comes from the iron and the thickness needed to pass the load test. Heavy covers stay seated under traffic, but you need proper lifting keys and two people to open them.
You can recoat it with a coating suitable for iron, but do not paint over the class marking or fill the keyholes. Ask the supplier which coating it recommends.
Ecotek Trading LLC (Horizon Towers, Ajman), Al Fatah International Trading LLC (Al Quoz Industrial Area 2, Dubai), Al Omraniya Trading Co LLC (Al Khabaisi, Deira, Dubai) and Soft Fitting Pipes & Fittings Trading Co. LLC (Al Quoz Industrial Area 4, Dubai) list ductile iron manhole covers on Yellow Pages UAE.
Yes. Listings do not show stock, so call Ecotek Trading LLC and Al Fatah International Trading LLC to check sizes, classes and collection times before driving to the warehouse.
Delivery terms are not stated on the listings. Ask Ecotek Trading LLC for a delivered price to your area.
For a chamber a person enters, 600 mm clear opening is the usual minimum and the most common size. Smaller covers, such as 450 mm, suit inspection chambers. Larger chambers use 700 to 1,000 mm or split covers. Stock varies by supplier.
Measure the clear opening inside the frame at its narrowest, the frame outside size and depth, and any recess depth for tiles or infill. Note the shape and hinge side, check whether the old frame is sound, and send photos with a tape in the shot.
Forecourts and truck areas generally need D400 or higher, because tankers and delivery vehicles are heavy. Car parks used only by cars can use B125. Confirm with your engineer and the site operator before ordering.
No. B125 is for footways, villa driveways and car parks used by cars. Roads and areas used by lorries, buses or water tankers need D400.
Some are, but the infill type and depth must match what the cover was tested with. Ask for the class with infill and the test report rather than assuming the base cover class applies.
Usually yes. Covers are made to fit one frame design, and the pair is normally supplied as a set. Replace only the cover if the existing frame is sound and matches the new cover's seating, and check that with the supplier.
A manhole cover closes a chamber used for access. A gully grating has openings that let surface water enter a drain. Both can be ductile iron and tested to EN 124, but they serve different purposes.
It has a gasket between cover and frame to limit water, smell or gas. It suits odour-sensitive or flood-prone locations. The seal needs periodic cleaning and greasing, especially after sand and dust.
Metal covers have scrap value, so theft happens. Locked or bolted covers help, and composite or concrete covers have no scrap value. Replace a missing cover immediately because an open chamber is dangerous.
There is no fixed figure. Life depends on the load class chosen, how well the frame is bedded, the coating and exposure to salt or chemicals. A correctly classed and properly installed DI cover is built for long service, and regular inspection helps catch problems early.
Ask for the EN 124 test report from an accredited laboratory, the material certificate showing the grade, the coating specification and any third-party certification. Request them before you pay, especially for project work.
Neither is always cheaper. Price depends on class, size, type, certification and quantity. Compare the delivered price for the same class and size, and include the cost of theft risk and replacement in your decision.
Ecotek Trading LLC in Ajman also appears in related Yellow Pages categories; these pages help you compare ductile iron manhole covers with other options.
Yellow Pages categories
Related guides
Contact Ecotek Trading LLC in Ajman or any supplier below directly about ductile iron manhole covers; phone numbers are blank until confirmed, because the listings show them only in part.
Horizon Towers, Ajman, UAE
P.O. Box: 45323
Tel: 06 7046767
Mobile: 054 4479788
★ 5 (3 reviews)
Google reviews · Get directions · Yellow Pages profile
Door No. 18, Al Fatah International Building, Street No. 14B, Near Jotun Paint, Al Quoz Industrial Area 2, Dubai, UAE
P.O. Box: 65620
Tel: 04 3383377 04 338 3377
Mobile: 054 3909772 054 3909772
★ 4.7 (29 reviews)
Google reviews · Get directions · Yellow Pages profile
Warehouse 5/14, Al Khabaisi St, 14B, Deira, Dubai, UAE
P.O. Box: 10757
Tel: 04 2682730 04 2682730
Mobile: 052 1640169 052 1640169
★ 4 (31 reviews)
Google reviews · Get directions · Yellow Pages profile
Al Quoz Industrial Area 4, Dubai, UAE
Mobile: 054 3229567 054 3229567
★ 4.6 (13 reviews)
Google reviews · Get directions · Yellow Pages profile:
Supplier details are taken from Yellow Pages UAE listings checked on 3 November 2026. Technical and safety notes are general guidance; have a qualified technician confirm them for your site.
North Group is a green company that provides eco-friendly, long-lasting and high-quality products and solutions for the construction sector through its North Construction Chemicals products.
North Group's brand portfolio includes products for adhesives, sealants, flooring, tiling, waterproofing, and construction chemicals.
North Group provides complete construction solutions including advice, training, and site support through its products and brands, including RepairPro, TilePro, AquashieldPro, FloorPro, AnchorPro, BondPro, SealPro, PlasterPro, ShieldPro, WallPro, and ShieldPro.
QCON General Trading LLC is one of UAE’s most respected retailers, wholesalers and authorized distributors for Quality Construction & Building materials with multiple branches across the UAE . (One-stop solutions for all Construction and Refurbishment needs)
• Construction Chemicals
• Gypsumboard Partitions & Ceilings
• Wall & Floor Coverings
• Building Materials, Safety & Hardware
• Painting & Decorating
• Tools & Equipment
• Electric & Lighting
• DIY, Home & Decor
The Bonn Metals Construction Industries (BMCI) is one of the best and leading manufacturers of cable trays in UAE.
Products & Services:- Cable Tray, PPR Pipes, Hot Dip Galvanisation, Cable Trunking, Unistrut Channel, Cable Tray Ladders, Cable Support System, Wire Mesh Tray, Steel Lintels, Cable Management Systems, Ms Angles, Square Bars, Flat Bars, Round Bars, Slotted channel, U channel, GI Lintel Supplier.