Epoxy Flooring Suppliers | 3D, Metallic Epoxy Flooring Services UAE

Epoxy Flooring Services in the UAE

Epoxy Flooring in UAE

Epoxy flooring is a resin-based floor coating system used across residential, commercial, and industrial sites in the UAE for its durability, chemical resistance, and seamless finish. It gives seamless sleek look for heavy traffic areas and resist stains. Suppliers and contractors across Dubai, Abu Dhabi, Ajman, and Umm Al Quwain offer a range of epoxy systems - from self-leveling and flake finishes to slip-resistant and decorative coatings - depending on the application and traffic load.

Epoxy Flooring Dubai - General Contracting and Installation

Epoxy resin is a combination of resion and hardener and also comes with an additive or pigments. They mainly eliminate bubbles during application. Every epoxy flooring can be cured on the same-day of installation work. Epoxy resin contains

• Primer Coat: 1x application, 2-5 mils (0.05-0.13mm) dry film thickness, seals the concrete substrate and prevents outgassing bubbles in later coats
• Base Coat: 1-2x applications, 12-20 mils (0.3-0.5mm) dry film thickness, provides the main color and body of the system
• Topcoat: 1x application, 3-10 mils (0.08-0.25mm) dry film thickness, clear or pigmented, adds wear resistance and gloss
• Total System Thickness: Typically 20-40 mils (0.5-1mm) for standard commercial-grade installation
• Cure Time: Foot traffic after 24 hours, vehicle/heavy traffic after 48-72 hours, full chemical cure at 7 days

Petrocoat Construction Chemicals Trading LLC

• Products and Services: Epoxy Flooring, High Strength Epoxy Grouts
• Brands: TREMCO Adhesive and Sealants, MASTER BUILDERS Construction Chemical, FIVE STAR Concrete and Repairs
• City: Dubai
• Location: Ras Al Khor Industrial Area 1

Petrocoat is based in Ras Al Khor Industrial Area 1, Dubai, and supplies epoxy flooring and high-strength epoxy grouts alongside a wider construction chemicals portfolio. Their TREMCO, MASTER BUILDERS, and FIVE STAR brand lines suggest a contractor set up to handle structural repair and flooring together on the same project.

Aureza Technical Services LLC

• Products and Services: Epoxy Flooring, Epoxy Flooring Service, Epoxy Floor Coating
• City: Dubai
• Location: Jebel Ali

Aureza Technical Services is based in Jebel Ali, Dubai, and lists epoxy flooring as its core offering across installation, service, and coating. As a dedicated epoxy specialist rather than a broader contractor, they're a direct contact for straightforward epoxy flooring work.

Sabz International

• Products and Services: Epoxy Flooring, Vinyl Flooring, Flooring Suppliers
• City: Dubai

Sabz International is based in Dubai and lists epoxy flooring alongside vinyl flooring and general flooring supply. Their broader flooring range can be useful if a project needs more than one flooring type sourced from the same supplier.

Industrial Epoxy Flooring and Heavy-Duty Systems in UAE

Industrial epoxy flooring is engineered for higher abrasion resistance, chemical exposure, and load tolerance - typically specified for warehouses, factories, and commercial floor screeding.

• Primer Coat: 1x application, 4-5 mils (0.1-0.13mm) dry film thickness for adhesion to industrial-grade concrete
• Screed / Body Coat: Aggregate-filled epoxy mortar, 1/8" to 3/8" (3-10mm) thickness, the primary load-bearing and impact-absorbing layer for forklift and heavy machinery traffic
• Intermediate Coat: 1-2x applications, 16-30 mils (0.4-0.75mm) dry film thickness, adds robustness between the screed and topcoat
• Topcoat: Chemical-resistant clear or pigmented finish, 3-10 mils (0.08-0.25mm), engineered for oils, solvents, and aggressive industrial chemical exposure
• Total System Thickness: 125-250 mils (3-6mm) for manufacturing floors; 188-250 mils (4.7-6mm) for warehouses with constant forklift activity
• Cure Time: Full chemical and mechanical cure typically 5-7 days before heavy machinery is permitted

AMC Protection LLC

• Products and Services: Epoxy Flooring, Epoxy Flooring Contractor, Epoxy Screed Work
• Brand Applicator Status: FOSROC, GEP, MAPEI
• City: Abu Dhabi

AMC Protection is based in Abu Dhabi and holds applicator status for FOSROC, GEP, and MAPEI - all recognized international construction chemical brands. This applicator-level relationship suggests they're trained and approved to apply these specific systems correctly, rather than just stocking generic epoxy.

Build Care International General Trading LLC SPC

• Products and Services: Epoxy Flooring, Epoxy, Industrial Flooring
• Brands: SIKA Floor Screed, CONMIX Aac Block Mortar, SAVETO Aac Block Mortar
• City: Abu Dhabi
• Location: Mussafah

Build Care International is based in Mussafah, Abu Dhabi, and lists epoxy flooring directly alongside industrial flooring work, carrying SIKA's floor screed line - a well-established name in industrial flooring systems.

Fort Specialties Trading LLC

• Products and Services: Epoxy Flooring, Epoxy, Flooring Suppliers
• Brands: MASTER BUILDERS Flooring Solutions, MASTER BUILDERS Grouts and Flooring Solutions, FOSROC Flooring Tiles
• City: Abu Dhabi
• Location: Musaffah

Fort Specialties Trading is based in Musaffah, Abu Dhabi, and carries both MASTER BUILDERS and FOSROC flooring lines, two brands with a strong presence in heavy-duty industrial flooring across the region.

Garage and Residential Epoxy Flooring

This category covers smaller-scale residential applications - garage floors, home flooring, and similar lower-traffic installations.

• Primer Coat: 1x application, 1-2 mils (0.025-0.05mm) dry film thickness, seals new or existing concrete
• Base/Color Coat: 1-2x applications, covering roughly 100-120 sq.ft. per gallon, provides the main color layer
• Topcoat: 1x application, 2-3 mils (0.05-0.08mm) dry film thickness, standard finish for light residential foot traffic
• Total System Thickness: 2-5 mils (0.05-0.13mm) for light residential use; up to 5-10 mils (0.13-0.25mm) for moderate foot traffic or added durability
• Cure Time: Foot traffic after 24 hours, vehicles after 48 hours, full chemical cure at 7 days

Naaz Construction Polymers LLC

• Products and Services: Epoxy Flooring, Epoxy Grouts, Floor Hardeners
• City: Umm Al Quwain
• Location: New Industrial City

Naaz Construction Polymers is based in Umm Al Quwain's New Industrial City and lists epoxy flooring alongside epoxy grouts and floor hardeners - a product mix consistent with smaller-batch residential and light-commercial polymer flooring work.

SIMGMC LLC

• Products and Services: Epoxy Flooring, Epoxy Coating, Painting Contractors
• City: Abu Dhabi
• Location: Corniche Tower

SIMGMC is based in Corniche Tower, Abu Dhabi, and combines epoxy flooring and coating with general painting contracting - a combined offering common to residential-scale contractors who handle multiple finishing trades on one job.

Slip-Resistant and Non-Slip Epoxy Flooring

This category covers epoxy floors with added anti-slip aggregate or texture, typically specified for safety-sensitive commercial and industrial walkways.

• Base Coat: 1x application, high-build epoxy, covering approximately 100-120 sq.ft. per gallon, the layer the aggregate is broadcast into while wet
• Anti-Slip Aggregate: Silica sand (50-70 mesh fine grade up to 20-40 mesh coarse grade), aluminum oxide, or colored quartz, broadcast at roughly 50 lbs per 100 sq.ft. for a full broadcast-to-refusal application
• Encapsulating Topcoat: 1x application, clear epoxy or polyaspartic, covering approximately 100 sq.ft. per gallon, fully seals the aggregate into the surface
• Grit Selection: Finer grit (50-70 mesh) for residential areas balancing safety with ease of cleaning; coarser grit (20-40 mesh) or aluminum oxide for industrial areas needing maximum traction
• Cure Time: Foot traffic after 24 hours; full chemical cure at 7 days before exposure to oils or aggressive chemicals

White Metal Contracting LLC

• Products and Services: Epoxy Flooring, Epoxy Line Marking, Waterproofing Company
• City: Ajman

White Metal Contracting is based in Ajman and pairs epoxy flooring with epoxy line marking - line marking work is commonly paired with slip-resistant industrial floor coatings, since both are usually specified together on warehouse and walkway floors.

Decorative and 3D Epoxy Flooring in UAE

Decorative epoxy systems include metallic, flake, and 3D visual finishes used in showrooms, retail, and feature residential spaces.

• Primer Coat: 1x application, pigmented or clear depending on the design effect, 2-5 mils (0.05-0.13mm)
• Base/Color Coat: 1x application, high-build colored or metallic-pigmented epoxy, covering approximately 100-120 sq.ft. per gallon
• Decorative Flakes: Vinyl or quartz flakes, available in full blind (complete coverage) or scatter (partial coverage) broadcast, sizes ranging from fine chips up to 2mm granules
• Clear Sealing Topcoat: 2x applications of high-solids polyaspartic or epoxy, first coat at approximately 150 sq.ft./gallon, second coat at 100-120 sq.ft./gallon over the flake-textured surface, since flakes absorb more clear coat than a smooth base
• Total System Thickness: 10-40 mils (0.25-1mm) added by decorative flake elements alone, on top of the base system thickness
• Cure Time: Flakes broadcast while base coat is still wet (within the open time of that coat); topcoat foot traffic ready after 24 hours

New Age General Contracting LLC (NET Interiors)

• Products and Services: Epoxy Flooring, Fitout Contractors, Interior Decorators And Designers
• City: Abu Dhabi
• Location: Mussafah

New Age General Contracting, trading as NET Interiors, is based in Mussafah, Abu Dhabi, and lists epoxy flooring alongside fitout contracting and interior design - positioning their epoxy work toward decorative, interior-driven finishes rather than purely industrial application.

Self-Leveling and Self-Smoothing Epoxy Systems in UAE

Self-leveling epoxy is poured to create a smooth, seamless, level surface - used where a flawless finish is required over an existing slab.

• Primer Coat: 1x application, 2-5 mils (0.05-0.13mm), critical for sealing the substrate before a thick poured layer is added on top
• Self-Leveling Base Layer: Poured (not rolled) application, minimum 2mm (1/16") thickness, typically settling in the 3mm (1/8") range as it self-levels under gravity
• Topcoat: 1x application, 0.7-1mm thickness, seals and protects the leveled surface while adding gloss or sheen
• Total System Thickness: 2.5-3mm for standard self-leveling floors; thicker systems available for added durability
• Cure Time: Self-leveling layer needs to cure undisturbed for 24-48 hours before the topcoat is applied; full chemical cure at 7 days

Prime Axis General Contracting LLC

• Products and Services: Epoxy Flooring, EPDM Flooring, Epoxy Flooring Contractor
• Brands: FOSROC, FOSROC Construction Chemicals, TERRACO Construction Chemicals
• City: Abu Dhabi
• Location: Elite Business Centre, Musaffah

Prime Axis General Contracting is based in Musaffah, Abu Dhabi, and applies FOSROC and TERRACO construction chemical lines across both epoxy and EPDM flooring work, suiting projects that need a consistent, level finish across a larger floor area.

Moark General Contracting LLC

• Products and Services: Epoxy Flooring, EPDM Flooring, Epoxy Flooring Contractor
• City: Abu Dhabi
• Location: Falcon Tower, Al Nasar Street

Moark General Contracting is based on Al Nasar Street, Abu Dhabi, and lists the same epoxy and EPDM flooring service profile as Prime Axis, making them a comparable contact for self-leveling flooring work in the same emirate.

Waterproof Epoxy Flooring in UAE

Waterproof epoxy systems combine flooring with a moisture or vapor barrier function, often specified alongside broader waterproofing scopes on a project.

• Primer Coat: 1x application, moisture-seal formulation, covering approximately 150-200 sq.ft. per gallon, penetrates the concrete to block vapor and outgassing
• Base/Membrane Layers: 2x applications, contributing to a target total dry thickness of 2.5-3.5mm to withstand immersion, hydrostatic pressure, and chemical exposure
• Topcoat: 1-2x applications for UV and chemical resistance, sealing the waterproof membrane against surface wear
• Total Layer Count: 3-5 coats typically, including primer, two base/membrane layers, and one or more topcoat layers
• Cure Time: Each layer must be fully cured before the next is applied - rushing thick applications is a common cause of blistering or debonding, so allow standard cure windows of 24-48 hours per layer

Royal Great Land General Contracting LLC

• Products and Services: Epoxy Flooring, Combo Roofing, Waterproofing
• City: Abu Dhabi
• Location: Al Ghaith Tower, Hamdan St

Royal Great Land General Contracting is based on Hamdan Street, Abu Dhabi, and lists epoxy flooring as part of a combined roofing and waterproofing service category, suiting projects where flooring and building envelope waterproofing are scoped together.

Unitek General Contracting LLC

• Products and Services: Epoxy Flooring, Roofing Contractors, Painting Contractors
• City: Abu Dhabi
• Location: Prestige Tower, MBZ

Unitek General Contracting is based in Prestige Tower, MBZ, Abu Dhabi, and lists epoxy flooring alongside roofing and painting contracting. Epoxy here sits within a broader building-envelope contracting scope rather than as a standalone specialty, so confirm directly how much dedicated flooring expertise sits behind their epoxy line.

Epoxy Coating for Insulation and Fire-Stop Applications

The two companies below list epoxy flooring, but their primary specialization and brand portfolio point to insulation, waterproofing membranes, or passive fire protection as their core business - epoxy appears to be an adjacent or supporting service rather than their main focus, so it's worth confirming directly how much dedicated epoxy flooring experience sits behind their listing.

• General Reference Only: A standard thin-film epoxy coating (primer plus 1-2 paint coats) runs 11-25 mils (0.3-0.6mm) total thickness, suited to light-traffic protective coating rather than heavy industrial flooring
• Not a Substitute for Trade-Specific Specs: Since epoxy isn't these companies' core listed specialty, ask for their actual epoxy system spec sheet directly rather than assuming standard flooring-grade thickness and cure times apply to their work

Advanced Insight Insulation LLC

• Products and Services: Epoxy Flooring, Epoxy, Epoxy Coating
• Brands: TECH 100 Waterproofing Materials, HYPERDESMO CLASSIC Waterproofing Materials, AIM Industries Waterproofing Materials
• City: Dubai
• Location: Clover Bay Tower, Business Bay

Advanced Insight Insulation is based in Clover Bay Tower, Business Bay, Dubai, and lists epoxy flooring and coating as part of its service range. Their brand lineup - TECH 100, HYPERDESMO CLASSIC, and AIM Industries - is entirely waterproofing-focused, which indicates their core specialization is waterproofing and insulation, with epoxy as a supporting line rather than their main trade. Ask them directly about their epoxy flooring track record specifically before relying on them for a dedicated flooring project.

Insulation Dynamics

• Products and Services: Epoxy Flooring, Fire Stop Material Supplies, Passive Fire Protection
• Brands: TERRACO EIFS Insulation, FISCHER Fire Stop
• City: Abu Dhabi
• Location: Lulu Centre, Salam Street

Insulation Dynamics is based on Salam Street, Abu Dhabi, and lists epoxy flooring alongside fire stop materials and passive fire protection. Their TERRACO EIFS and FISCHER Fire Stop brand lines confirm their core specialization is fire protection and building insulation, with epoxy flooring listed as a secondary service. As with Advanced Insight, confirm their actual epoxy flooring experience directly rather than assuming it matches their fire-protection expertise.

Epoxy Resin - Material and Surface Applications

This is a distinct but related category from epoxy flooring: epoxy resin as a raw or applied material used across surfaces beyond flooring, including countertops, lamination, and general construction bonding.

Epoxy Resin for Surfaces and Construction

Epoxy resin used for floor coatings overlaps with the flooring contractors listed above, but epoxy resin is also widely used for table tops, worktops, and other decorative surfaces, as well as for laminating and general construction bonding applications. None of the companies listed on this page specifically advertise table-top, worktop, or laminating-grade epoxy resin work, so if that's what you need, it's worth searching specifically for a resin-casting or surface-finishing specialist rather than assuming a flooring contractor covers this niche.

Common Epoxy Flooring Product Types

These are real, named epoxy flooring products that exist in the broader market. None of the 15 companies listed on this page are confirmed to carry these specific branded lines, so they're included here as general reference rather than attributed to any particular supplier - always confirm with a contractor directly which branded products they actually use.

Resincoat HB Epoxy Garage Floor Paint in UAE

A high-build, solvent-free epoxy floor paint designed for garages, offering thick coverage and strong resistance to oil, petrol, and general automotive fluids.

Resincoat Fast Cure Epoxy Garage Floor Paint in UAE

A quick-turnaround version of the standard garage floor paint, formulated to cure in a few hours rather than days, useful when a garage or workshop can't be out of service for long.

Heavy Duty PRS Penetrating Epoxy System in UAE

A low-viscosity penetrating sealer used to strengthen and restore weak or poorly compacted concrete screeds before a topcoat is applied, rather than a decorative finish on its own.

Resincoat Fast Cure Epoxy Primer in UAE

A rapid-curing primer used as the first step before applying a fast-cure topcoat, designed to let an entire flooring job - primer and paint - be completed within a single day.

Single and Double Garage Floor Paint Bundles in UAE

Pre-packaged kits sized for single or double garage floor areas, typically bundling the paint, primer, and application accessories needed to complete the job without sourcing each component separately.

Self-Smoothing Resins in UAE

A category of resin systems designed to self-level when poured, creating a flat, seamless finish over an existing slab without manual smoothing, related to the self-leveling epoxy systems described above.