
Location : Shop 4, Musaffah 37
Phone :
02 67...02 6794433
Mobile :
052 3... 052 3590146

Trusted HDPE Pipe & Fittings Supplier in the UAE (An ISO 9001, 14001 & 45001 standard wholesale trader).
Location : Warehouse No. 5, Al Shamsi Building, M36, Mussafah Industrial Area
Phone :
02 88...02 8843375
Mobile :
050 4... 050 4784625

Location : Gargash Warehouses # 8,11,12,13 & 14, Near Al Shola Arabic School, Industrial Area 13
Phone :
06 53...06 5389484
Mobile :
050 7... 050 7579005

Location : M04, Building No 25, Salam Street
Mobile :
050 5... 050 5540245,
050 9050 9300936

Location : Umm Al Thuoob, New Sanaya
Mobile :
050 6... 050 6766710,
050 5050 5562560

Location : Al Qusais Industrial Area 2
Phone :
04 26...04 2693863
Mobile :
050 2... 050 2866782,
050 3050 3571124

Location : ICAD – 3, Abu Dhabi Industrial City
Phone :
02 44...02 4498099
Mobile :
055 5... 055 5939688,
055 6055 6080515

Location : Shop 4, Al Owais Building, Building No 56, M9, Mussafah
Mobile :
050 5... 050 5498957

Location : Mussafah M9
Phone :
052 1...052 1133282
Mobile :
050 7... 050 7170316,
050 1050 1763353

Location : Warehouse No - 3, Sheikh Omar Al Majid Bldg, Beside Duty Free Warehouse, Umm Ramool
Phone :
04 25...04 2518606
Mobile :
050 4... 050 4056890,
050 3050 3224617

Location : Office 2 , HC Floor, Emirates N Tower, Next to Sahara Centre, Al Nahda
Phone :
06 74...06 7453744
Mobile :
055 2... 055 2255633,
055 5055 5141565

Location : Shop 10, DTS Building, Al Rigga, Union, Deira
Phone :
04 26...04 2693971
Mobile :
050 1... 050 1554895



Location : Warehouse 5, Street 3A, Bagar Rasti Compound, Umm Ramool, Rashidiya
Phone :
04 29...04 2996378
Mobile :
055 6... 055 6529084

Location : Ras Al Khor Industrial Area 2
Phone :
04 32...04 3204120
Mobile :
055 2... 055 2219418

Location : Near Al Shola School, Industrial Area 13
Phone :
06 54...06 5442388
Mobile :
050 9... 050 9423000
A pipe buried under a Dubai road needs to survive ground movement, chemical exposure, decades of pressure cycling, and UAE's brutal subsurface heat without ever being dug up again for repair - and that's exactly the job High-Density Polyethylene pipe was engineered for. HDPE has become the default choice across UAE water networks, gas distribution, drainage, and irrigation precisely because it does the one thing rigid pipe materials struggle with: it flexes instead of cracking, it welds into genuinely leak-free joints rather than relying on gaskets that degrade over time, and it shrugs off the corrosion that destroys metal pipe in this region's soil and water conditions. Whether you're a contractor specifying pipe for a municipal water project, a developer planning irrigation for a landscaped community, or a facilities engineer sourcing replacement drainage pipe, this guide covers every HDPE pipe type, grade, and specification available in the UAE, what it should cost, and the established suppliers and brands to call today.
|
DN20–DN1600
Diameter range available across UAE HDPE pipe suppliers
|
50+ Years
Expected service life of correctly installed PE100 pipe
|
-40°C to +80°C
Operating temperature range for fusion-welded HDPE joints
|
PE80 / PE100
The two material grades that determine pressure capability
|
HDPE (High-Density Polyethylene) pipe is a thermoplastic piping material manufactured from a high-density form of polyethylene resin, extruded into pipe and fused together using heat rather than glue, gaskets, or threaded connections. That fusion welding process - either butt fusion for larger diameters or electrofusion for fittings and smaller connections - is the single biggest reason HDPE has displaced traditional materials like ductile iron, steel, and PVC across so much of UAE's underground infrastructure: a properly fused HDPE joint is genuinely as strong as the pipe wall itself, meaning the joint is no longer the weak point in the system the way a gasketed or threaded connection always is.
Q: Why does UAE infrastructure specifically favour HDPE over other pipe materials?
Three UAE-specific factors make the case for HDPE particularly strong here. First, ground movement and differential settlement in reclaimed and desert soil conditions - HDPE's flexibility lets it accommodate this movement without cracking, while rigid pipe materials are far more prone to fracture under the same stress. Second, UAE's aggressive soil and groundwater chemistry, which corrodes metal pipe over time in a way that simply doesn't affect a polymer material. Third, the sheer cost and disruption of digging up buried infrastructure under live roads in Dubai, Abu Dhabi, and Sharjah - HDPE's 50+ year design life and leak-free fusion joints mean far fewer of these disruptive, expensive excavation repairs over the asset's lifetime.
HDPE pipe specifications can look like an alphabet soup of codes on a datasheet - PE100, SDR11, PN16 - but each one tells you something specific about what the pipe can actually handle. Here's what every spec means and which type fits which application:
Q: Does the same HDPE pipe work for water, gas, and drainage, or do I need a different specification for each?
The base material is the same family of resin, but the certification, colour, and sometimes the wall construction differ meaningfully by application - using water-grade pipe for gas, or vice versa, is both a compliance failure and a genuine safety risk. Here's how requirements differ:
Used across both urban and rural distribution networks in the UAE, offering high hydraulic efficiency with minimal scaling or biological growth compared to metal alternatives. Potable water pipe must carry certification confirming the material is safe for drinking water contact - look for NSF or WRAS certification on any pipe destined for a potable water network. Water pressure pipe is typically supplied black with blue identification stripes, with common specifications around PN10–PN16 for distribution networks. Available in coils up to 200 metres for smaller diameters or straight lengths for larger mains.
Widely used across Dubai, Abu Dhabi, and Sharjah for both flexibility in tricky ground conditions and genuine chemical resistance against aggressive wastewater. Corrugated double-wall pipe (commonly SN4, SN8, or SN10 ring stiffness classes, in diameters from DN200 to DN800) is the standard for stormwater and sewer networks, while 6-metre double-wall corrugated lengths are particularly common for urban road drainage and broader infrastructure projects. Typical applications include stormwater management, sanitary sewage systems, chemical effluent drainage, and landfill leachate piping.
Must meet strict safety and regulatory standards given the consequences of a failed joint in a gas network. Fusion-welded joints provide the gas-tight seal required for natural gas transmission and distribution across the UAE, manufactured to PE80 or PE100 grade and conforming to ISO 4437 and EN 1555 standards. Gas pipe is supplied in distinctive yellow or orange colouring specifically for safe identification, in SDR11 and SDR17 thicknesses, and carries traceability codes for quality assurance tracking. Particularly suited to underground and trenchless installation methods where minimal surface disruption is required.
Delivers efficient water flow for both drip and sprinkler irrigation systems, with UV-stabilised construction essential given how much of an irrigation network sits exposed to direct UAE sun rather than buried. Particularly valuable in water-scarce growing conditions where efficient, leak-free delivery directly affects crop yield and water cost. Flexible enough to follow uneven land contours, chemically resistant to fertiliser exposure, and commonly used beyond pure agriculture for landscaping, soakaway systems, and leach field applications.
HDPE pipes are widely used for underground fire water mains supplying hydrants, sprinkler systems, fire pump rooms, and dedicated fire protection networks across commercial buildings, industrial facilities, airports, warehouses, and infrastructure developments in the UAE. Their corrosion resistance, flexibility, and leak-free fusion-welded joints make them well suited for buried fire water pipelines where long service life and minimal maintenance are essential. Fire water HDPE pipes are commonly manufactured from PE100 material and selected according to the project's required diameter, SDR rating, and operating pressure while complying with consultant specifications and local authority requirements. When integrated with approved valves, hydrants, and fire protection equipment, HDPE piping provides a durable and dependable solution for underground fire water distribution systems.
A pipe run is rarely just straight pipe - every UAE HDPE installation needs a range of fittings to change direction, branch off, reduce diameter, or transition to a different pipe material. Here's what's Hdpe pipes and fittings accessories available:
These accessories exist to ensure the entire network maintains the same pressure-tight, leak-free joint quality as the straight pipe runs - a single poorly specified fitting can become the weak point in an otherwise excellent installation, which is why fitting selection deserves the same attention as pipe selection itself.
Picking a brand name off a supplier's list isn't enough on its own - what actually matters for your project is the material grade, the pressure class, and the size range that brand's specific product line covers. Before comparing brands, it helps to understand the two numbers that define almost every HDPE pipe spec sheet: the material grade (PE80 or PE100) and the SDR/PN rating (Standard Dimension Ratio, which determines pressure class). A lower SDR number means a thicker wall and a higher pressure rating - SDR 11 (PN16) is standard for most distribution networks, while SDR 17 (PN10) suits lower-pressure transmission mains. Here's how that plays out across the brands available in the UAE market.
Polyfab's HDPE pressure pipe range is manufactured from PE100 material and conforms to ISO 4427, available in diameters from 16mm up to 500mm, with pressure ratings spanning PN6 to PN25. The product line is WRAS approved for potable water installations, meaning it's suitable for drinking water network connections, not just general-purpose fluid transport.
SHIELD's HDPE range covers water, gas, and fire protection applications, with the gas pipe line manufactured to ISO 4437 and BS EN 1555. The preferred series for gas applications are SDR 11 and SDR 17, with other SDR classes available on request. Sizing and wall thickness follow ISO 11922-1, and the product is supplied in coils of 50m and 100m for sizes up to 160mm, or in straight lengths of 6m or 12m for larger diameters.
Cosmoplast's product range extends across HDPE, PPR, and UPVC piping systems, which matters most when a single project specification calls for more than one pipe material - say, HDPE for the main distribution run and PPR for internal hot and cold water lines within a building. Rather than juggling separate suppliers for each material type, a multi-material range like Cosmoplast's lets a contractor source the full plumbing material list from one relationship.
Union Global's distinguishing strength is fabrication capability for complex HDPE items - custom-shaped fittings, reducers, and connection pieces that a standard catalogue range doesn't cover, alongside standard HDPE pressure pipe supply. They also offer fusion welding equipment hire, which matters for any contractor who needs to join HDPE pipe on-site but doesn't own the specialist butt-fusion or electrofusion machinery required.
NAFFCO Flow Control's positioning combines HDPE piping systems with fire protection solutions and valves under one technical supplier relationship. For a project where the HDPE pipe network connects directly into a fire protection system - underground fire mains feeding hydrants or sprinkler risers, for example - sourcing both the pipe and the associated fire protection equipment from a single supplier with technical expertise in both areas reduces interface risk between separately sourced systems.
GoFlo's India-based manufacturing reaches the UAE market through a joint venture with Sorkhi Industries for contract manufacturing, offering both HDPE80 and HDPE100 grades. The two-grade offering is useful where a project genuinely doesn't need PE100's higher pressure rating - PE80 remains a valid, more economical choice for lower-pressure or non-critical applications, while PE100 covers higher-pressure distribution needs.
Vectus is recognised specifically in the gas pipeline product space, with HDPE gas distribution pipe engineered for impact resistance and flexibility to ISO 4437 and EN 1555 standards - the same dual-standard combination that governs most gas-grade HDPE pipe globally. Gas-grade pipe is manufactured and tested to a different safety profile than water pipe, with additional requirements around permeability and the consequences of a fitting failure being considerably more serious than with water.
GLOBAL
REMOTE Abu Dhabi · Trading Company
|
Global Remote Building Materials Trading LLC
ISO 9001, ISO 14001 & ISO 45001 Certified HDPE Pipe & Fittings Supplier for Water, Infrastructure & Industrial Projects
Location: Mussafah Industrial Area, Abu Dhabi, UAE
Product Line: HDPE pressure pipes, HDPE fittings, electrofusion fittings, butt fusion fittings, valves, and complete piping solutions for utility and infrastructure projects Applications: Potable water distribution, irrigation networks, drainage systems, industrial process pipelines, and municipal infrastructure developments Certifications: ISO 9001, ISO 14001, and ISO 45001 certified wholesale building materials supplier Supply Capability: Stocks HDPE piping components and fittings suitable for both routine maintenance requirements and large-scale infrastructure projects across the UAE Indicative Cost: Pricing varies based on pipe diameter, pressure class (PN), SDR rating, and project quantity; bulk quotations available upon request Best Suited For: Contractors, MEP companies, infrastructure developers, and industrial projects seeking a single supplier for HDPE pipes, fittings, and associated piping materials with dependable project support |
COCHIN
STEEL LLC Dubai · Manufacturer
|
Cochin Steel LLC
PE100 HDPE Pipe Manufacturer for Water Distribution, Drainage & Irrigation Projects in Dubai
Location: Dubai, UAE
Product Line: PE100 grade pressure pipe, manufactured in-house rather than traded Diameter Range: DN20 to DN630, covering domestic connection sizes through to medium-diameter distribution mains Pressure Classes: PN10, PN16 as standard stock; PN20 available to order for higher-pressure applications SDR Options: SDR11, SDR17, SDR21 Indicative Cost: DN110 PE100 SDR17 PN10 runs approximately AED 36–48 per metre ex-factory; DN225 in the same spec runs approximately AED 150–190 per metre Best Suited For: Water distribution networks, drainage retrofits, and irrigation mains where buried and exposed sections both need to be specified from the same manufacturer batch for consistency |
BRIGHT DEAL
INTERNATIONAL Sharjah & Abu Dhabi
|
Bright Deal International General Trading LLC
Cosmoplast Distributor & Structured Wall HDPE Pipe Trader for UAE Industrial & Municipal Infrastructure
Location: Sharjah and Mussafah, Abu Dhabi, UAE
Brands Carried: Cosmoplast (authorised Abu Dhabi distributor); also stocks own-trade structured wall pipe and fittings Product Line: Structured wall (corrugated) drainage pipe, electrofusion fittings, custom-fabricated manifolds for water and gas transmission Diameter Range: DN200–DN800 for structured wall drainage; DN32–DN315 for Cosmoplast pressure pipe range Ring Stiffness Classes: SN4, SN8 for corrugated drainage pipe Indicative Cost: DN300 SN4 corrugated drainage pipe runs approximately AED 140–175 per metre; custom manifold fabrication quoted per drawing rather than off a standard list Best Suited For: Multi-emirate industrial projects needing both standard Cosmoplast catalogue pipe and one-off custom manifold fabrication from a single supplier |
OPAR
TRADING Sharjah
|
Opar Trading
Pimtas-Brand HDPE Pipe & Fittings Distributor Meeting ISO & DIN Standards in Sharjah
Location: Sharjah, UAE
Brands Carried: Pimtas HDPE fittings and coupler range; PE80/PE100 pipe under their own regional stock line Product Line: Pressure pipe (PE80/PE100), HDPE corrugated drainage pipe, potable water supply pipe Diameter Range: DN20–DN500 across pressure and drainage lines Standards: ISO 4427 (pressure pipe), DIN 8074/8075, with potable water line tested to drinking water safety standards Indicative Cost: DN63 PE100 SDR17 PN10 runs approximately AED 13–18 per metre; Pimtas electrofusion couplers DN63 run approximately AED 35–70 per piece Best Suited For: Buyers wanting a single Sharjah-based source for both pressure pipe and the Pimtas-brand fittings to complete the same installation |
RADIUS STAR
PIPING Dubai
|
Radius Star Piping LLC
Custom-Fabricated Segmented HDPE Fittings & Fusion Welding Rental Service in Dubai
Location: Dubai, UAE
Product Line: Custom-fabricated segmented bends and fittings, full pipe fabrication and rental service, plus contracting and on-site fusion welding support Diameter Range: Segmented fittings fabricated from DN110 up to DN800, built to drawing rather than off a fixed catalogue Equipment Available: Butt fusion welding machine rental across the DN63–DN800 range, with operator hire option Indicative Cost: Segmented 90° bend in DN315 runs approximately AED 600–950 per piece depending on wall thickness; fusion machine rental for DN63–DN160 sizes runs approximately AED 400–900 per day Service Commitment: Faulty pipe replacement or technician dispatch within 48 hours, with scheduled site visits and maintenance guidance included on contracted projects Best Suited For: Projects needing non-standard fitting geometry that a catalogue fitting can't cover, or contractors who need welding equipment and a trained operator rather than just pipe supply |
Q: Why does HDPE pipe pricing vary so much between suppliers for what looks like the same product?
A handful of specification details drive most of the price variation you'll see across UAE quotes, and understanding them helps you compare quotes properly rather than just picking the lowest number on the page:
Q: I have a diameter and pressure class in mind - what will it actually cost per metre in the UAE?
Here's a realistic per-metre price reference across the most commonly ordered HDPE pressure pipe sizes in the UAE market, covering both PE80 and PE100 grades at SDR11 (higher pressure, thicker wall) and SDR17 (lower pressure, thinner wall):
| Diameter | PE80 SDR17 (PN10) | PE100 SDR17 (PN10) | PE100 SDR11 (PN16) |
|---|---|---|---|
| DN32 | AED 4–6/m | AED 5–7/m | AED 7–10/m |
| DN63 | AED 11–15/m | AED 13–18/m | AED 18–25/m |
| DN110 | AED 32–42/m | AED 36–48/m | AED 52–68/m |
| DN160 | AED 68–88/m | AED 76–96/m | AED 110–145/m |
| DN225 | AED 135–170/m | AED 150–190/m | AED 215–280/m |
| DN315 | AED 260–330/m | AED 290–365/m | AED 420–540/m |
| Diameter | SN4 | SN8 |
|---|---|---|
| DN200 | AED 65–85/m | AED 85–110/m |
| DN300 | AED 140–175/m | AED 180–225/m |
| DN500 | AED 360–450/m | AED 460–580/m |
| DN800 | AED 820–1,050/m | AED 1,050–1,350/m |
| Item | Typical Size | Typical UAE Price |
|---|---|---|
| Butt fusion elbow/tee | DN110 | AED 80–180/piece |
| Electrofusion coupler | DN63 | AED 35–70/piece |
| Electrofusion tapping saddle | DN110 main | AED 90–160/piece |
| Flanged adaptor + backing ring | DN160 | AED 250–420/set |
| Butt fusion machine rental | DN63–DN160 range | AED 400–900/day |
Prices above are indicative per-metre rates for cut-length or standard coil purchases from UAE trading stock as of current market conditions and will move with resin/polyethylene feedstock pricing, order volume, and specific brand certification level. Always request a written quote for your exact diameter, SDR, grade, and quantity before finalising a project budget.
For an accurate quote, always specify diameter, SDR or wall thickness, pressure class, material grade, and application (water, gas, drainage, or industrial) to your UAE supplier - a vague enquiry gets a vague, often misleading price range, while a fully specified enquiry gets you a number you can actually compare against a second supplier.
PE100 is a newer-generation, higher-density resin with significantly better long-term strength than PE80. For the same wall thickness, PE100 handles higher pressure, or it can use a thinner wall to match a PE80 pipe's pressure rating, saving material cost. Most new UAE municipal and gas infrastructure specifies PE100 as standard, with PE80 still common in lower-pressure agricultural and drainage applications.
Correctly specified and installed PE100 HDPE pipe is generally designed for a service life of 50 years or more, even under UAE's challenging soil and ground movement conditions. The genuine leak-free nature of fusion-welded joints, combined with the material's resistance to corrosion and chemical attack, is what allows this long design life compared to metal pipe alternatives.
No. While both use HDPE resin, water pipe and gas pipe carry different certifications, colour coding, and sometimes different formulation requirements. Potable water pipe needs NSF or WRAS certification confirming drinking water safety, while gas pipe must meet ISO 4437 and EN 1555 standards with distinctive yellow or orange colouring for safe identification during excavation. Using the wrong type for either application is both a compliance failure and a genuine safety risk.
SDR (Standard Dimension Ratio) is the ratio of pipe outside diameter to wall thickness, and it's the practical way pressure rating is expressed on a supplier's price list. A lower SDR number means a thicker wall and a higher pressure rating at the same outside diameter. Always confirm the SDR alongside the diameter when ordering, since the same nominal diameter pipe can come in several different SDR options with very different pressure capabilities and prices.
For projects connecting to public water, sewage, or gas networks, yes - Dubai Municipality, DEWA, or the relevant local authority typically requires compliance documentation including pressure test reports and, for potable water, certification confirming the product is approved for drinking water use. Ask your supplier directly whether they can provide this documentation alongside the product, since sourcing non-compliant pipe can delay or block project approval entirely.
We are the leading suppliers for : Door Handles, Door Accessories, Door Closer, Concealed Hinges, Ironmongery, Exit Devices, Doors Hardware, Glass Door Fittings, Locks
Brands: ASSA ABLOY | DORMAKABA | GEZE | OTLAV | SIMONSWERK |
Tel:04-3301419
Email:[email protected]
One of the leading supplier and stockists of Building Materials, Sanitary-wares & Cleaning Products. Phone: 06-5344246, Email: [email protected]
One of the leading Signboard manufacturing Company.
Our Product range from 3D Signage, Metal Signage, Wooden Signage, LED Signs, LED Digital Screen, Pylon Signs, Neon Sign, Architectural Signage, totem Signs, Traffic Signs.
Mob: +971 50 636 2672
Email: [email protected]
Website: https://www.smarthousesigns.com/