Bolts And Nuts In UAE – Heavy Duty, Stainless Steel & Metric Sizes Available

What are Bolts and Nuts—and Which Type Do I Need?

Bolts and nuts are mechanical fasteners used to clamp two or more parts together. The “right” type depends on load, environment, material, and installation method. Start with the application below, then narrow by material, thread, and head/shape.

Quick valuable bolts and nut picks for you:

• General shopping hub:
  Bolts and Nuts in UAE, Dubai • Bolts, Nuts and Washers
• Stainless choices:
  Stainless Steel Bolts and Nuts in UAE
• Galvanized/steel:
  GI Hex Bolts • GI Carriage Bolts

Bolts & Nuts Suppliers in UAE

UAE fastener suppliers stock hex bolts, socket cap screws, studs, U-bolts, anchor bolts, chemical/mechanical anchors, and a wide range of nuts & washers (nyloc, flange, spring, flat). Materials include carbon steel (zinc/HDG), stainless steel 304/316, and alloy grades in 8.8 / 10.9 / 12.9, following ISO/DIN/ASTM/BS standards for construction, MEP, marine and oil & gas projects.

Services cover cutting to length, thread rolling, surface coatings, mill test certificates (MTC), and bulk delivery across the UAE.

Typical UAE price range (AED): Hex Bolts (M6–M20) 0.50–12/pc • Structural Bolt Sets (M20–M36) 8–60/set • Stainless 304/316 Bolts 1.5–45/pc • Chemical/Mechanical Anchors 6–120/pc • Nuts & Washers 0.10–5/pc • Threaded Rod (per meter) 6–35.

Note: Pricing varies by diameter/length, material (zinc/HDG/SS 304/316), grade (8.8/10.9/12.9), and order volume (box/pallet).

Bolts & Nuts Suppliers in UAE – High-Tensile Fasteners, Structural Bolts, Anchors & Industrial Fixings

Below are verified UAE suppliers specializing in:

hex bolts, nuts, washers, threaded rods, SS 304/316 fasteners, HDG bolts, anchors, U-bolts, clamps, and MEP fastening systems.

Oman Ocean Trading LLC – Hex Bolts, Anchors, Threaded Rods | Bulk & Project Fastener Supply UAE

Contact: 050-4509347

A contractor working on a warehouse extension in JAFZA was stuck due to delay in bulk delivery of M16 hex bolts and chemical anchors. Every hour of delay meant labour sitting idle and penalties increasing.

He contacted Oman Ocean Trading LLC, hoping for a faster turnaround.

Their team immediately checked stock, matched the specification sheet, and arranged same-day delivery of:

• Hex bolts (8.8 & 10.9 grade)
• HDG anchors
• Full-length threaded rods

The project resumed within hours. The contractor later signed them as his default fastener supplier.

Oman Ocean Trading became his “project-saver” and proved that fasteners when delivered on time can keep entire schedules on track.

Stylish Building Materials – Stainless Steel 304/316 Fasteners, Washers & Nuts | Corrosion-Resistant Fasteners UAE

Contact: 056-7071220

A facility maintenance team working near the coastline in Umm Suqeim struggled with bolts corroding within months due to salt in the air. Replacing fasteners repeatedly was expensive and frustrating.

They approached Stylish Building Materials for a longer-lasting solution.

The team recommended:

• SS 304 nuts & bolts for general areas
• SS 316 marine-grade bolts for high-salt zones
• Heavy-duty washers to reduce joint vibration

Within weeks, the facility team noticed a dramatic drop in rusting complaints. This helped saving them dozens of man-hours each month.

Stylish Building Materials became their go-to supplier for corrosion-proof UAE fasteners.

Loyd Building Materials Trading LLC – Structural Bolt Sets, Chemical Anchors & Threaded Bars UAE

Contact: 056-5486880

A steel fabrication company had a deadline to complete a mezzanine structure. But lacked certified structural bolt sets that matched their consultant’s specification.

They contacted Loyd Building Materials Trading LLC, who checked the drawings and provided:

• Structural bolt sets with mill test certificates
• High-strength threaded bars
• ETA-approved chemical anchors

With the right documentation and accurate sizing, the consultant approved the installation instantly. The project moved forward without rework or material rejection.

Loyd Building Materials became their reliable partner for certified structural fasteners.

Al Abbasi Fasteners and Hardware – High-Tensile Bolts 8.8/10.9/12.9, Nyloc Nuts, Washers & Hardware Supplies UAE

Contact: 050-4530296

A mechanical contractor in Sharjah kept facing bolt failures during machine installation. This is because the fasteners used were sub-grade. The downtime was costly and frustrating.

He turned to Al Abbasi Fasteners and Hardware.

Their team supplied:

• High-tensile 8.8 | 10.9 | 12.9 bolts
• Nyloc and flange nuts
• Hardened washers

For the first time, the contractor completed a full machine installation without a single bolt shear or thread issue. His workers requested Al Abbasi fasteners by brand name.

Al Abbasi became his trusted source for heavy-duty engineering fasteners.

Husaini Brothers (LLC) – MEP Fasteners, Stainless Steel Fasteners & Fixing Systems UAE

Contact: 058-1083540

An MEP subcontractor working in a high-rise tower project struggled with ceiling fixing failures. The anchors kept loosening under load.

He approached Husaini Brothers (LLC) for a better solution.

They recommended:

• MEP-grade anchors
• Stainless steel fasteners for long-term durability
• Proper fixing systems designed for high vibration

After switching, the team reported zero anchor failures and faster installation across every floor.

Husaini Brothers became their long-term MEP fastener partner.

Blue Steel Building Mat Trading LLC – HDG Bolts & Nuts, U-Bolts, Clamps & Industrial Fixings UAE

Contact: 056-6782123

An industrial plant in Ras Al Khor required HDG bolts and U-bolts for outdoor pipe racks that were exposed to rain and chemical vapors. Their old supplier had inconsistent stock, causing repeated delays.

Blue Steel stepped in with ready availability of:

• HDG (hot-dip galvanized) bolts
• U-bolts for piping
• Industrial pipe clamps
• Heavy-duty fastener kits

The maintenance head confirmed that corrosion issues reduced significantly after switching to Blue Steel’s HDG solutions.

Blue Steel became the plant’s preferred supplier for outdoor and industrial fasteners.

Ebrahim Yousuf Trading LLC – Carbon Steel & Stainless Fasteners, Washers & Accessories UAE

Contact: 055-8766529

A workshop needed both carbon-steel fasteners for machinery work and stainless fasteners for light fabrication. Managing two suppliers was slowing them down.

Ebrahim Yousuf Trading LLC simplified everything.

They supplied a complete mix of:

• Carbon-steel bolts & nuts
• Stainless steel fasteners
• Washers, spring washers, split rings
• General hardware accessories

The workshop improved procurement efficiency and reduced supplier dependency.

Ebrahim Yousuf Trading became their “one-stop fastener hub.”

Golden Bridge Building Materials Trading LLC – Hex Bolts, Nuts, Anchors & Threaded Rods UAE

Contact: 056-3361645

A construction company needed large volumes of anchors and threaded rods for a commercial project. But suppliers kept giving inconsistent pricing.

Golden Bridge solved the issue by providing:

• Transparent bulk prices
• Consistent stock
• Same-day delivery
• Anchor bolts and threaded rods in multiple grades

With predictable pricing and reliable supply, the contractor maintained cost control and met project milestones.

Golden Bridge became their stable long-term fastener supplier.

Titanic Trading LLC – General Fasteners, Stainless Steel 304/316, Anchors & Fixings UAE

Contact: 055-3624305

A maintenance team for a shopping mall needed a reliable supplier for day-to-day bolts, nuts, anchors, and stainless fixings. Their previous source had inconsistent stock.

Titanic Trading LLC offered:

• General hardware fasteners
• SS 304/316 corrosion-resistant bolts
• Anchors for MEP and civil work
• Complete fixing solutions

With everything available under one roof, the team reduced store trips and increased maintenance response speed across the mall.

Titanic Trading became their dependable fastener partner.

Types of Bolts and Nuts Used in UAE Projects

UAE construction, MEP, marine, industrial, and oil & gas sectors use a wide range of bolts, nuts, and fasteners based on load, corrosion resistance, and structural safety requirements. Below are the most commonly used types:

1. Hex Bolts (Hex Head Bolts)

The most widely used bolt type in UAE. Available in grades 4.6, 5.6, 8.8, 10.9, and 12.9 for everything from lightweight fixtures to heavy-structural connections.

• Zinc-plated hex bolts
• Hot-dip galvanized hex bolts
• Stainless steel 304/316 hex bolts
• High-tensile hex bolts

2. Carriage Bolts

Commonly used in woodwork, furniture, and light structures. GI (galvanized iron) carriage bolts are widely used for outdoor and fencing applications.

3. Anchor Bolts (Mechanical & Chemical)

Used heavily in construction, MEP installations, and steel structures.

• Wedge anchors
• Sleeve anchors
• Drop-in anchors
• Chemical anchors (ETA certified)
• Foundation anchor bolts

4. U-Bolts & Clamp Bolts

Essential for HVAC, MEP, ducting, and pipeline support systems.

• HDG U-bolts for outdoor piping
• Stainless U-bolts for corrosive environments
• Pipe clamps with rubber lining

5. Threaded Rods (Studs)

Supplied in 1m and 3m lengths for MEP supports, ceilings, cable tray brackets, and heavy machines.

• GI threaded rods
• HDG threaded rods
• Stainless steel studs
• High-tensile threaded rods

Grades of Bolts Commonly Used in UAE

Bolt grade determines the load-bearing capacity. These are the most used grades:

• Grade 4.6: Light applications
• Grade 8.8: Medium-heavy structural use
• Grade 10.9: High-strength steel structures
• Grade 12.9: Machinery, heavy equipment, automotive
• Stainless Steel 304: General corrosion resistance
• Stainless Steel 316: Marine and harsh UAE coastal environments

Nuts Used with Bolts in UAE

Nuts must match bolt grade and thread. UAE suppliers offer the following:

• Hex nuts
• Nyloc nuts
• Flange nuts
• Cap nuts
• Wing nuts
• Lock nuts
• Square nuts
• Stainless steel nuts (304/316)

Washers Used in UAE Projects

Washers distribute load and prevent damage to surfaces. Widely used washers include:

• Flat washers
• Spring washers
• Fender washers
• Lock washers
• Stainless steel washers
• HDG washers

Applications of Bolts and Nuts in UAE Sectors

• Steel construction
• HVAC & MEP supports
• Oil & gas installations
• Marine and coastal environments
• Machinery assembly
• Furniture and woodwork
• Automotive repairs
• Fabrication workshops

How to Select the Right Bolt or Nut for UAE Conditions

Bolt selection heavily depends on the environment, humidity, temperature, and structural load. In the UAE, coastal corrosion, dusty climates, and high heat make material selection more critical.

1. For Coastal / Marine Areas (Dubai Marina, JBR, Palm, Sharjah Waterfront)

• Always use SS 316 bolts & nuts
• Avoid zinc-plated fasteners
• Use HDG only for non-critical items

2. For Construction & Steel Structures

• Grade 8.8 for general structures
• Grade 10.9/12.9 for load-bearing connections
• HDG coating for outdoor exposure

3. For MEP & HVAC Works

• Zinc-plated bolts for indoor use
• HDG threaded rods for AC supports
• Stainless bolts for chilled water pipes

4. For Industrial Plants (Dubai Industrial City, KIZAD, JAFZA, ICAD)

• Use alloy steel bolts for machinery
• Use SS 316/duplex steel for chemicals exposure
• Use premium anti-vibration fasteners for high-load equipment

Bolt Sizes Commonly Available in UAE

Standard sizes follow DIN, ISO, ASTM and BS specifications:

• M4 – M8: Light-duty applications
• M10 – M16: MEP, equipment installation
• M20 – M24: Construction & steel structures
• M27 – M36: Heavy structures & industrial plants
• M42+: Specialized heavy equipment

Why UAE Contractors Prefer High-Tensile Bolts (8.8 / 10.9 / 12.9)

High-tensile bolts are essential because UAE projects involve heavy loads, outdoor exposure, and seismic compliance. They provide better grip, longer service life, and higher safety.

• Used in steel structures
• Support beams and trusses
• Heavy machinery installation
• Industrial plants

Why Stainless Steel 304/316 Bolts Are Popular in UAE

UAE’s humidity and coastal air cause rapid corrosion of standard steel bolts. SS 304/316 fasteners are preferred in environments where longevity and corrosion resistance matter.

• SS 304 – general corrosion resistance
• SS 316 – marine-grade, ideal for salt areas
• Used in facades, glass installations, HVAC, marine works

Where to Buy Bolts and Nuts in UAE

Bolts and nuts are available in Dubai, Sharjah, Abu Dhabi, Ajman, Ras Al Khaimah, and Fujairah across fastener shops, wholesale distributors, and industrial supply stores.

• Industrial hardware shops
• Fastener wholesale markets
• Steel & fabrication suppliers
• MEP material suppliers
• Marine supply stores

The suppliers listed above deliver across UAE with options for bulk pricing, project delivery, and same-day dispatch in many cases.