Al Qouz 4Dubai36765
Umm RamoolDubai

Products & Services : 

Corrugated SheetsSheet Suppliers
About Corrugated Sheets

Corrugated sheets are also known as galvanised iron sheets, wriggly tin sheets and pailing. This is a special metal which can be modified in different ways and reinforced to offer added protection. Corrugated steel panels are a popular choice for roofing solution for agricultural and commercial buildings. It is also used in the residential sector and for sliding options as well. Corrugated steel sheets are wavy in design and come in different patterns which include linear an square edged shapes. In most cases, they are prefabricated and erected immaterially which minimises worker's involvement. Sheet designers create corrugated sheets using a cold form process where the sheet metal is pressed flat and undergoes a process known as roll forming. In this process, sheets are pressed with rolling dies which create corrugation. These corrugations can be modified by changing rolling dies. The finished corrugated sheets are sheared off to a particular length for increased strength.

Since steel has a higher tensile strength than wood corrugations can help increase the tensile strength to a greater extent as it runs perpendicular to the grooves. In this manner, the finished steel offers resistance to different types of impact groves which have a high strength to weight ratio as compared to any concrete construction material. The sheets consist of corrugated groves which increase the water shedding properties thereby making them desirable for both roofing and sliding applications.

Corrugated sheets can be used for sliding material as they are generally durable, resistant to damage, require minimal maintenance, affordable, sustainable and known for their aesthetic versatility. It is known for its low lifetime cost of investment as buildings which are constructed using this material tend to last for decades. Corrugated siding is resistant to different threats which include wind, rain and hail. It also offers protection for pest infestation, fire and physical damage. Corrugated sheet manufacturers coat the metal with a protective coating which offers resistance to moisture penetration and decay. Corrugated siding is resistant to wrapping, buckling, thermal expansion and vinyl siding. A high-quality steel sliding is good enough and requires minimal maintenance as it is not prone to dust accumulation. This is because the protective coating acts as a shield to prevent dust and moisture accumulation. Most corrugated steel siding can last for fifty years or more if they are maintained properly.

You will be connected to