Pex Piping in Abu Dhabi

PEX piping systems are integrated piping systems which are very economical and easy to manufacture. They are more cost-effective and can be installed quickly due to their design. PEX is a polythene based material which is cross-linked in a unique manner to enhance the level of strength effectively. Half inch PEX tubing costs less than copper and is best suited to perform minor plumbing operations. PEX piping system manufacturers use a manifold and home run system to design and install PEX pipes. It is a conventional method of making a quick connection as copper pipes need to be soldered properly.

A PEX tubing system will not corrode like copper as it remains unaffected by acidic water as cross-linked polymers exhibit corrosion resistant properties. Therefore they are best suited in areas which are prone to corrosion and also for industrial applications. These pipes cause more odour and release organic carbon and organic compounds. They are not suited for outdoor applications because if cross-linked polyethene is exposed to direct sunlight it will melt. PEX piping systems replace copper in plumbing applications as they are easy to install, easy to maintain and relatively economical.

PEX piping systems are known for their flexibility and are widely used in household applications such as in residential plumbing applications. They can be bent into a wide radius turn and can accommodate elbow joints and other pipe fittings if required. They are also designed to handle a shorter turning radius as they can be supported with the help of a metal radius. Two PEX pipes can be joined together to accommodate a wider turning radius of 90 degrees. In most cases, they are connected with the help of an elbow joint. PEX pipes are easy to maintain and install as they provide a direct routing straight from the distribution point to the outlet fixture without the need of cutting the pipe. Due to their flexible nature, a direct line can be supplied from the water source with the help of just one connection at an end.

PEX piping systems have fewer sharp turns which facilitates in the equal distribution of water pressure. Therefore they are best suited for use in toilets and bathroom applications. Most materials cost less than twenty-five percent as compared to other alternatives such as copper, rubber or other metals. This is because polyethene is a relatively cheap material and when cross-linked their strength gets enhanced to a considerable extent. PEX pipes do not corrode or rust easily as they are designed to repel moisture and do not contain any metallic parts which make them prone to corrosion. PEX piping system manufacturers make custom fittings which help them join a copper pipe with a PEX pipe. This allows customers to extend or reduce the diameter of pipes. PEX piping is best suited for long life applications as they need not be replaced progressively and the average lifespan of a PEX pipe is around fifty years. Most manufacturers offer a twenty-five-year warranty which covers all types of manufacturing defects. Some popular locations to find PEX piping in Abu Dhabi are Musaffah, Tourist club area, ICAD 3, Hamdan Street, Karama, Electra Street, Airport road and Musaffah Industrial area.