Pipes And Pipe Fittings in Abu Dhabi
AADTRA are stockist of Pipes, Pipe Fittings, Flanges & Valves in Carbon Steel, Stainless Steel, Alloy Steel, Duplex, Super Duplex, Copper Nickel, 6MO, Inconel, Monel, M.I. & G.I. and other industrial products from various origins.
About Pipes and Pipe Fittings
Pipes and pipe fittings include common piping and plumbing fittings, drain waste vent related fitting, hydraulic fittings, PVC pipes, Metallic pipes, PEX pipe, copper pipes galvanized pipes and much more. Some popular piping and plumbing fittings include elbow, coupling, union, Nipple, reducer, double tapped brushing, tee, diverter tee, cross, cap, plug, barb and valve. Some commonly used drain waste vent related fittings include slip joint fitting, sweep elbow, closet flange, clean out, trap primer, combo tee, sanitary tee, baffle tee, Wye fitting and side inlet TY. Companies which provide pipes and pipe fittings supply different types of hydraulic fittings such as hydraulic actuators, hydraulic valves and hydraulic pumps as well.
Pipes and pipe fittings include stainless steel pipes which are considered to be one of the most robust and most reliable pipes. They are easy to clean and look neat and are best suited for areas which are prone to corrosion. There are two main types of stainless steel pipes which are the flexible pipe and the rigid pipe. Plumbers attach couplings to them for better support. They come in different sizes and lengths. PEX piping is a flexible piping solution which is best suited for households and small businesses. It offers efficient water distribution within a premise. It offers a leak proof solution and can be easily installed. It is produced for other similar designs as they are highly useful for other similar applications as well. However, PEX piping cannot be used in outdoor applications as ultraviolet rays can damage the layer effectively. Copper pipes are considered to be the traditional plumbing pipe as it is known for its reliability. It is corrosion resistant and can be used to transport both cold and hot water. Pipe and pipe fitting manufacturers design copper pipes with varied thickness for different applications. Copper piping can be easily repaired if damaged by soldering the damaged portion. However, they must be installed professionally as an improperly installed pipe is prone to leakage.
PVC plumbing pipes are used in hot and cold potable water as it is best suited for sewage applications. They vary in thickness and configuration depending on their design. They are suitable for different applications as they are commonly used for the transportation of high-pressure water. Pipes and pipe fittings include galvanised pipes and brass pipes which are used for gardening and household applications. Galvanized pipes are relatively old in design and are used in the transportation of noon portable water as it is prone to rust. Brass pipes exhibit excellent rust resistance properties as it is made up of 67 to 85% copper. They are easier to thread as compared to steel pipes and are commonly used in large distribution systems.
One of the most commonly used pipe fittings is the elbow. The elbow is used to change the directional flow of water between two pipes. There are two types of elbows which are the normal elbow and the reducer elbow. Two pipes of the same diameter are connected with a regular elbow and that of different diameters are connected with a reducer elbow. Some popular locations to find pipes and pipe fittings in Abu Dhabi are Musaffah Industrial area, Old passport road, Salam Street, Khalifa Street and Darwich Bin Karam Al Quwaish building.